Dwarf Device Settings

The MOD Dwarf when powered up

This page holds the information on how to use the Settings menu on your MOD Dwarf.

Overview

These are the Settings you can access and control directly in your device, even when you are disconnected from your computer:

• Audio Inputs: setup your input gain values
• Audio Outputs: setup your output gain values
• Headphone Output: set up the volume of your headphones (volume of headphones output)
• Sync: setup your sync settings
• MIDI: setup your MIDI settings
• User Profiles: load and save your different user profiles settings
• Display: setup the appearance of your device screen
• Appearance: setup the appearance of your device screen on playing mode
• System Behavior: setup the USB-B Mode and Compensate Ground Loop feature
• Controller Behavior: setup the default tool and the menu button mode
• Menu Items: define the Menu Items that appear when you push the Menu Button
• Bluetooth: this menu allows you to enable Bluetooth discovery and shows information regarding the Bluetooth connection.
• Info: this menu shows you information regarding your MOD Dwarf
• System Upgrade: Upgrade the operative system of your MOD Dwarf

To navigate between the items on the list of settings you should turn the left most encoder to right (going down the list) or to the left (going up on the list). To access an item menu on this list you should push the "Enter button (leftmost button pad) or you can simply push the same encoder that you use to navigate on the list.

To exit this menu you should push the "Exit" button (middle button pad). If you prefer you can also push the central endless knob.

Accessing and navigating the Settings Menu

Push the Menu Button on your Dwarf. This will open a screen with your defined Quick Items.

Note: you can define the mode of the Menu Button (between latching and momentary) on the Behaviour Settings. By default, the Menu Button mode is latching.

While on this screen, push the left-most pad button to access your MOD Dwarf settings.

Scroll the options in the Settings menu by rotating the left-most knob. Push the same knob in order to access the selected sub-menu.

Press the central pad button to exit the Settings Menu.

Audio Inputs

On this menu, you can adjust your Input Gain levels.

Turn the left-most encoder of your MOD Dwarf to adjust both of the input gains simultaneously.

Turn the central encoder of your MOD Dwarf to adjust only the input 1 gain level.

Turn the right-most encoder of your MOD Dwarf to adjust only the input 2 gain level.

Notes:

• if you push the encoder while you turn it will allow you to increase or decrease values faster;
• simply turn the knobs to fine adjust the values;
• push and turn the knobs to apply less precise adjustments.

Audio Outputs

On this menu, you can adjust the Output Gain levels of your MOD Dwarf.

Turn the left-most encoder of your MOD Dwarf to adjust both of the output gains simultaneously.

Turn the central encoder of your MOD Dwarf to adjust only the output 1 gain level.

Turn the right-most encoder of your MOD Dwarf to adjust only the output 2 gain level.

Notes: the same encoder techniques as for the input controls apply to the output settings

• if you push the encoder while you turn it will allow you to increase or decrease values faster;
• simply turn the knobs to fine adjust the values;
• push and turn the knobs to apply less precise adjustments.

Headphone Output

This menu allows you to adjust the headphone output volume on your MOD Dwarf.

Sync

In this menu, you can select your Clock Source and set your MOD Dwarf to send a clock signal.

You can set the Clock Source to be Internal, over MIDI port or Ableton Link.

MIDI

On this menu, you can define MIDI settings for your MOD Dwarf.

Here you can define the MIDI Program Change Channel used to change your pedalboards and snapshots if you define any.

User Profiles

User Profiles allow you to switch between pre-configured device settings.

Say you use your device sometimes to play with your guitar and microphone, in the studio, and sometimes with a synth in a live performance. For each situation, you might need to have different Input and Output gains and volume settings. So a user profile can be used to quickly switch between setups.

The settings that can be stored in a User Profile are:

• Input settings: Everything under Audio Inputs
• Output settings: Everything under Audio Outputs
• Sync settings: Everything under Sync
• MIDI settings: Everything under MIDI

Switching between User Profiles

To switch between users' profiles you simply need to turn the left most endless knob. This will allow you to swipe between all the user profiles. To validate the selection you should click the knob while the new User Profile shows us up to you.

Saving a new User Profile

You can have up to four User Profiles. The first step to save a new user profile is to choose which from these four profiles will be overwritten. You do that by turning the central endless knob.

Before saving you must:

1. Navigate to System Settings and change values for Input, Output, and Sync and MIDI settings
2. Navigate back to the User Profiles menu

After selecting the profile that you want to change, click the central endless knob to confirm it.

Display Settings

400px

400px

Display Brightness

Turn the left-most endless knob to change the LCD display's brightness. The value increments in 25 steps and the available options are:

• 0% (off)
• 25%
• 50%
• 75%
• 100%

You should adjust this value accordingly to your environment and to your viewing angle. Flat viewing angles may require higher brightness settings and vice versa.

Display Contrast

Turn the central endless knob to change the LCD displays contrast.

You should adjust this value always according to the environment and the position of the device in your setup.

Behavior Settings

400px

Default Tool

Turn the leftmost endless knob to select your default tool.

This is the tool that shows up when you simultaneously push the footswitch A and B.

You can select between:

• Tuner
• Tempo

Learn more about the available tools here.

Menu Button Mode

This option allows you to define the way that the Menu Button responds in order to access the Menu Items:

The different modes are:

• Latching: allows you to access the Menu Items menu by pushing the Menu Button once (pushing it again to exit)
• Momentary: allows you to access the Menu Items menu while pushing and holding the Menu Button (releasing it will exit the Menu Items screen)

USB-B Mode

Turn the leftmost endless knob to define the mode of the USB-B port on your MOD Dwarf. You can select between:

• Network (Default)
• Net+MIDI
• Net+MIDI (Windows)

Note: to change the USB-B Mode on your MOD Dwarf it will be required to reboot the device.

Network (Default)

By using this mode, your MOD Dwarf will be recognized as a network device on your host computer (or any other devices where you can access the WebGUI using the USB port).

This mode will allow you to access the WebGUI in your favorite browser by navigating to http://moddwarf.local/ (or http://192.168.51.1).

Net+MIDI

By using this mode, your MOD Dwarf will be recognized as a network device and also as a MIDI interface on your host computer (or any other devices where you can access the WebGUI using the USB port).

This mode will allow you to access the WebGUI in your favorite browser by navigating to http://moddwarf.local/ (or http://192.168.51.1).

This mode also allows your MOD Dwarf to receive and send MIDI messages over the USB port.

Note: This mode doesn't work in some computers running Windows.

Net+MIDI (Windows)

By using this mode, your MOD Dwarf will be recognized as a network device and also as a MIDI interface on your host computer (or any other devices where you can access the WebGUI using the USB port).

This mode will allow you to access the WebGUI in your favorite browser by navigating to http://moddwarf.local/ (or http://192.168.51.1).

This mode also allows your MOD Dwarf to receive and send MIDI messages over the USB port.

Note: This mode was specially designed to tackle the issues of having the MOD Dwarf recognized as a MIDI device on some Windows computers.

Appearance Settings

Control Header

Turn the central endless knob to select if you want your Pedalboard Name to appear on the Control Header section of the main screen of your MOD Dwarf or instead you want to have your current Snapshot Name.

Unassigned Actuators

Turn the rightmost endless knob to define if the unassigned actuators should be shown or hidden on your screens.

These are the physical actuators that are not assigned to any parameter in your current pedalboard and also for the page that you have selected. Check more on Switching Pages.

Menu Items

In this menu, you can define and organize the three menu items that show up on your screen when you push the Menu Button.

To select the item for each position you simply need to turn the respective endless knob.

• For Item 1 you must turn the leftmost endless knob.
• For Item 2 you must turn the central endless knob.
• For Item 3 you must turn the rightmost endless knob.

Here is the list of all the settings that you can define for each of the three menu items:

• Input 1 and 2 Gain (simultaneously)
• Input 1 Gain
• Input 2 Gain
• Output 1 and 2 Gain (simultaneously)
• Output 1 Gain
• Output 2 Gain
• Headphone Volume
• Clock Source
• Send Clock state (On/Off)
• Pedalboard Program Change Channel
• Snapshot Program Change Channel
• Display Brightness
• Beats Per Minute
• Beats Per Bar

Bluetooth

This option displays several Bluetooth information and allows you to turn on the Discovery mode for 2 minutes.

Status: This shows if the discovery of your device is available or not.

Name: This shows the name of your device in the Bluetooth network. You can change this name on MOD Web GUI. More info here.

Address: This shows the Bluetooth address of your device.

Info

This screen shows you your current firmware version and also the serial number of your MOD Dwarf.

System Upgrade

This option is only meant to be used for maintenance purposes. In a regular situation, all software upgrades will be performed via the Web GUI interface.

If you need to run a manual upgrade, use this option. See Manual upgrade for more details.