Difference between revisions of "Dwarf Technical Specs"

Revision as of 14:01, 16 March 2021

The MOD Dwarf when powered up

MOD Dwarf back view showing all its ports.

2x independent audio inputs with:
- with an input adjustment between -35 and +12dB Line level;
- TS connectors;
- Input impedance 1 MΩ (clarify this)
- Programmable Fine Adjust Gain Amplifier: ± 12 dB Gain, 0.5 dB step; (clarify this)
- 24 bit Digital Audio convertion Bit Depth.
2x independent audio outputs with:
- TS Line Level;
- TS connectors (balanced compatible);
- Volume Control: 0 to -127 dB, 0.5dB step; (clarify the steps)
- 24 bit Digital Audio convertion Bit Depth.
Headphone output:
- 3.5mm TRS connector
- Digital volume control from +12dB to −33dB (clarify this)

Each input/output uses a TS connector and has a LED whose color depends on the audio signal amplitude. Learn more about the Duo LED indicators here.

USB HOST - USB 2.0 Standard-A type
- USB Bluetooth
- USB Wifi
- USB MIDI
USB DEVICE - USB 2.0 Standard-B type
- USB Ethernet Connection
- USB Mass Storage (used for updates)
- USB MIDI

3 endless knobs
3 performance buttons (that allow you to switch between control assignments pages)
2 footswitches with color LEDs
1 footswitch (that allow you to switch between control assignments pages for the footswitch A and B)
RJ-45 connector for additional controllers (see Control Chain)

The MOD Dwarf uses a Linux operating system with LV2 plugins to define virtual pedalboards.

Revision as of 14:01, 16 March 2021 (view source) Joao.sensiguitar (talk \| contribs) ← Older edit		Revision as of 14:01, 16 March 2021 (view source) Joao.sensiguitar (talk \| contribs) Newer edit →
Line 1:		Line 1:
−	[[File: Dwarf_FrontPanel.png\|~~500px~~\|thumb\|The MOD Dwarf when powered up]]	+	[[File: Dwarf_FrontPanel.png\|400px\|thumb\|The MOD Dwarf when powered up]]

	== Technical specs ==		== Technical specs ==