Troubleshooting Reinstall via LiveSuit

Location of the FEL button on the MOD Duo

Installing MOD Duo via LiveSuit

WIP notes only

mention tool is not made by MOD

needs driver install

mod needs to be disconnected before starting livesuit?

Installing FEL mode USB driver

1. Press the windows key and 'R' at the same time to get the 'Run' dialog. Type "devmgmt.msc" and press enter. (This will open the Device Manager)

2. Find the MOD Duo device. It should appear as 'Unknown device' under 'Other devices' like the image below shows.

3. Right click on the selected item and select 'Update Driver Software...'.

4. Select 'Browse my computer for driver software'

5. Click the 'Browse' button and select the folder where you extracted the contents of the LiveSuit1.0.7.zip file, then click 'Next'.

6. Wait for Windows to finish installing the driver.
If you're running a 64bit version of Windows ...

7. That's it! The driver is installed. :)

8. If everything is working correctly, the Duo will appear as 'USB Device(VID_1f3a_PID_efe8)' under 'Universal Serial Bus controllers'