The MOD Duo and Duo X units run a highly-optimized Linux embed system, using JACK as audio server and loading plugins in LV2 format.
Plugin parameters can be controlled via the units' built-in knobs and footswitches, via MIDI CC and Pitchbend or via Control Chain devices.
As of release 1.1 the MOD Duo runs the Linux kernel version 3.4, with real-time patch. Running in a ARMv7 32bit OS.
The MOD Duo X runs version 4.9, also with real-time patch. Running in a ARMv8a 64bit OS.
ALSA is used for the audio driver. JACK runs inside as audio server backend, with mod-host loading each LV2 plugin as a new (internal) JACK client. mod-ui is the web server, it talks to mod-host over a unix socket.
There's no X11 or any other kind of graphical interface. In fact, X11 libs are not even available.
The MOD Duo CPU is a dual-core Cortex A7, running at a constant 912 MHz. It is possible to set the speed to 1.0GHz, but with the risk of stability issues. The MOD Duo X CPU is a quad-core Cortex A53, running at a constant 1.5GHz.
The compiler is GCC 4.9.
The default compilation flags for the Duo are:
-O3 -mcpu=cortex-a7 -mtune=cortex-a7 -mfpu=neon-vfpv4 -mfloat-abi=hard -mvectorize-with-neon-quad
And the flags for Duo X are:
-O3 -mcpu=cortex-a53 -mtune=cortex-a53
(Note: 64bit ARM compilers do not use 'fpu' flags, as their usage is implied)
For aggressive optimization, add these:
-ffast-math -fprefetch-loop-arrays -funroll-loops -funsafe-loop-optimizations
Building binaries for the MOD Duo can be easily done using the mod-plugin-builder.
Apart from programming software in a "traditional" way, it's also possible to generate audio plugins for the MOD from gen~ objects created in Cycling '74 Max. See the Max_gen~ page for more details.
These are useful links for general information regarding developing audio plugins and realtime software.
Please note that it is also possible to build LV2 plugins using DPF or Juce.
The mod-plugin-builder is a custom build system that gives developers a similar system to what's available inside the Duo.
We do not recommend the use of a regular Linux armhf system or compiler, it might lead to issues due to mismatching library versions.
If you're running Linux just clone MOD Plugin Builder and follow the instructions.
$ git clone git://github.com/moddevices/mod-plugin-builder $ cd mod-plugin-builder $ ./bootstrap.sh modduo
This process should take at least 1 hour, probably more depending on your CPU.
Assuming your source code is cross-compile friendly (ie, no hardcoded compiler and paths and uses pkg-config to find extra libraries), the compiler setup is as simple as: (adjust as needed)
$ pushd ~/mod-plugin-builder/ $ source local.env modduo $ popd $ # cmake, waf configure, ./configure, etc $ make
The local.env file will setup your Linux compiler environment variables (such as CC, CXX, CFLAGS, etc) to use mod-plugin-builder files.
If everything goes well, the resulting binaries will be ARMv7, MOD Duo compatible.
Quick example plugin
A quick example plugin is available inside mod-plugin-builder in plugins/package/eg-amp-lv2/source/, which works with this cross-compilation setup.
Building this example plugin can be done like so:
$ source ~/mod-plugin-builder/local.env $ make -C ~/mod-plugin-builder/plugins/package/eg-amp-lv2/source
After this the eg-amp.lv2 bundle is ready to be deployed into a MOD unit.
You can push an LV2 plugin bundle to the MOD Duo via command-line, using curl, by running this: (adjust as needed)
$ cd ~/mod-plugin-builder/plugins/package/eg-amp-lv2/source/ $ tar cz eg-amp.lv2 | base64 | curl -F 'package=@-' http://192.168.51.1/sdk/install
That's it! Your plugin is now inside the Duo!
To those curious ones, the last command packs the eg-amp.lv2 into a tar.gz file, encodes it as base64 and then sends it to a special URL that the MOD unit uses to install plugin tarballs.
APIs and Documentation
Being Linux, developers have access to UNIX and POSIX APIs.
This means <unistd.h>, <pthread.h> and <stdlib.h> for example.
For more information see:
Also known as Jack Audio Connection Kit, is the audio server running inside the MOD.
Developers can create JACK clients to interact with the audio data directly (without being managed by a plugin host).
For more information see:
NOTE: All MOD units use JACK2.
Audio and MIDI plugins in MOD Duo are done in LV2 format.
MOD provides custom LV2 extensions (for MOD specific data and HTML interfaces).
For more information see:
As of release 1.1, the MOD Duo uses:
- GCC 4.9
- glibc 2.21
- binutils 2.25
This means support for C11 and C++11.
C++14 or higher is not supported.
The following libraries are available inside the Duo:
- glibc (v2.21)
- lvtk (v1 and v2)
- python (v3.4)
- qt5 (core, network, sql and xml)
- systemd (v219)
MOD's web interface has some hidden features, not really useful for users but useful for developers.
- Buffer size change (128 or 256 frames per cycle)
- Install-All button in plugin store
- Network statistics
- Xrun counter (aka audio drop-outs)
To enable developer mode, open the browser developer console and enter:
Starting from v1.3, this setting is saved within the MOD, and developer mode is enabled the next time the page loads.
To disable developer mode, open the browser developer console and enter:
By default unstable plugins are hidden in the plugin store; however they can be made visible for use within pedalboards:
- For releases 1.5.0 and later, there is an option on the special settings page: http://modduo.local/settings (or http://192.168.51.1/settings if you don't have zeroconf working).
- For earlier releases, open the browser development console and enter:
NOTE: Do not report bugs when using unstable plugins.
They have not been curated or tested, so they might corrupt memory or even crash.
Use with caution.
USB Device Support
- Most USB-MIDI devices (if they are class-compliant, they should just work)
- Arduino running MocoLufa firmware (to create midi-controllers)
- PlayStation 3 and 4 Controllers
- Guitar Hero Controller (Red Octane Xbox version)
- Any regular joystick
- Dual Core ARMv7 1.0GHz
- 4GB Flash Storage, 1GB RAM
- Cirrus Logic, 24 bit / 48 kHz AD/DA
- DAC/ADC: 104dB Dynamic Range. -90dB THD+N
- 2 knobs with LCD screen
- 2 foot switches with color LEDs
- MIDI IN/OUT – Standard DIN 5 pins
- Control Chain – RJ45 connector – for additional controllers
- USB HOST – USB 2.0 Standard-A type, supporting: USB Bluetooth and USB MIDI
- USB DEVICE – USB 2.0 Standard-B type, supporting: USB Ethernet Connection