Difference between revisions of "Custom IP Address"

Latest revision as of 18:03, 13 May 2022

ssh into the mod, then mount the filesystem in read-write mode.

Then run:

sed -i "s|192.168.51.|192.168.52.|g" /etc/dnsmasq.conf /etc/network/interfaces
sync && mount / -o remount,ro && sync && hmi-reset && reboot

A few notes:

At least 1.10.4 is required to do this.
Reinstalling or updating the MOD OS will revert the changes, back to using the default 192.168.51.1 IP

@@ Line 1: / Line 1: @@
-ssh into the mod, then mount the FS as read-write:
+[[Access_MOD_using_SSH|ssh into the mod]], then mount the filesystem in read-write mode.
-<source lang="bash">
+Then run:
-mount / -o remount,rw
-</source>
-then run:
 <source lang="bash">
-sed -i "s|192.168.51.1|192.168.52.2|" /etc/dnsmasq.conf /etc/network/interfaces /etc/ssh/sshd_config
+sed -i "s|192.168.51.|192.168.52.|g" /etc/dnsmasq.conf /etc/network/interfaces
-sync && mount / -o remount,ro && reboot
+sync && mount / -o remount,ro && sync && hmi-reset && reboot
 </source>
-NOTE: At this point it's not possible to have 2 MODs connected via USB, even if they use different IPs.<br>
+A few notes:
-If you need 2 MODs, consider using one MOD connected via USB and the other connected via Bluetooth.
+* At least 1.10.4 is required to do this.
+* Reinstalling or updating the MOD OS will revert the changes, back to using the default 192.168.51.1 IP